Calendar

Month: Year:
« Prev February 2012 Next »
MonTueWedThuFriSatSun
   1
2
AGC/ITD Joint Highway ForumAGC/ITD Joint Highway Forum
Time: 8:00 am - 5:00 pm, In Coeur d'Alene, Idaho

Email Molly Conein at mconein@idahoagc.org for agenda and additional information.
3
4
5
6
AGC/ITD Joint Highway ForumAGC/ITD Joint Highway Forum
Time: 12:00 am - 12:00 am, In Boise, ID


7
First Aid/CPR/AED Class - CLOSED - FULLFirst Aid/CPR/AED Class - CLOSED - FULL
Time: 8:00 am - 12:00 pm, In Idaho AGC Education Center - Boise

This 4 hour class meets the OSHA requirement for medical services and first aid [1926.50 (c)]. Upon completion, participants receive a course completion card to document the training. This card is valid for two years. The cost is $40 for members and $60 for non-members. This class runs from 8AM to 12PM.
8
Forklift Operator CertificationForklift Operator Certification
Time: 8:00 am - 1:00 pm, In Idaho AGC Educaton Center - Boise

Forklift certification training for warehouse style and construction all-terrain forklifts to comply with OSHA standard 1910.178(l) and 1910.178(l)(4)(iii). 3 Year Certification cards will be issued at the completion of this class. The cost is $65 for Idaho AGC members. This class runs from 8AM to 1PM. ***Forklift Operator Training is offered to Idaho AGC Members Only.***
9
AGC/ITD Joint Highway ForumAGC/ITD Joint Highway Forum
Time: 8:00 am - 5:00 pm, In Idaho Falls, ID


First Aid/CPR/AED ClassFirst Aid/CPR/AED Class
Time: 8:00 am - 12:00 pm, In Idaho AGC Education Center - Boise

This 4 hour class meets the OSHA requirement for medical services and first aid [1926.50 (c)]. Upon completion, participants receive a course completion card to document the training. This card is valid for two years. The cost is $40 for members and $60 for non-members. This class runs from 8AM to 12PM.
10
11
12
13
OSHA 510 Standards for the Construction IndustryOSHA 510 Standards for the Construction Industry
Time: 12:00 am - 12:00 am, In Idaho AGC Education Center - Boise


14
OSHA 510 Standards for the Construction IndustryOSHA 510 Standards for the Construction Industry
Time: 12:00 am - 12:00 am, In Idaho AGC Education Center - Boise


OSHA 10 HR Construction CourseOSHA 10 HR Construction Course
Time: 12:00 am - 12:00 am, In Idaho AGC Education Center - Boise

This 2 day 10 Hour construction safety course was developed by the US Department of Labor to provide construction workers, supervisors, and other personnel responsible for construction activities with an awareness of construction safety and health concerns in the construction industry. Upon successful course completion, the student will receive an OSHA construction safety and health 10 Hour course completion card. The OSHA 10 Hour focuses on the most dangerous areas in the construction industry including the OSHA Introduction, Fall Protection, Electrical, Excavations, Materials Handling, Personal Protective Equipment, Cranes, Stairways and Ladders, Hazard Communication / Silica, and Hand and Power Tools. The cost will be $125 for members and $160 for non-members. The first day will run from 8:00AM - 3:00PM. The second day will run from 8:00AM - 12:00PM
15
OSHA 510 Standards for the Construction IndustryOSHA 510 Standards for the Construction Industry
Time: 12:00 am - 12:00 am, In Idaho AGC Education Center - Boise


OSHA 10 HR Construction CourseOSHA 10 HR Construction Course
Time: 12:00 am - 12:00 am, In Idaho AGC Education Center - Boise

This 2 day 10 Hour construction safety course was developed by the US Department of Labor to provide construction workers, supervisors, and other personnel responsible for construction activities with an awareness of construction safety and health concerns in the construction industry. Upon successful course completion, the student will receive an OSHA construction safety and health 10 Hour course completion card. The OSHA 10 Hour focuses on the most dangerous areas in the construction industry including the OSHA Introduction, Fall Protection, Electrical, Excavations, Materials Handling, Personal Protective Equipment, Cranes, Stairways and Ladders, Hazard Communication / Silica, and Hand and Power Tools. The cost will be $125 for members and $160 for non-members. The first day will run from 8:00AM - 3:00PM. The second day will run from 8:00AM - 12:00PM
16
OSHA 510 Standards for the Construction IndustryOSHA 510 Standards for the Construction Industry
Time: 12:00 am - 12:00 am, In Idaho AGC Education Center - Boise


CLC MixerCLC Mixer
Time: 5:30 pm - 7:30 pm, In Rudy's Pub & Grill, Meridian.

Join the Idaho AGC Construction Leadership Council and the Boise State Construction Management Program Alumni for a fun monthly mixer.
17
CLC Casino NightCLC Casino Night
Time: 6:00 pm - 10:00 pm, In Idaho AGC Training Center


18
19
20
Overton Mobile Crane Operator QualificationOverton Mobile Crane Operator Qualification
Time: 12:00 am - 12:00 am, In Idaho AGC Education Center - Boise


21
Overton Mobile Crane Operator QualificationOverton Mobile Crane Operator Qualification
Time: 12:00 am - 12:00 am, In Idaho AGC Education Center - Boise


22
Overton Mobile Crane Operator QualificationOverton Mobile Crane Operator Qualification
Time: 12:00 am - 12:00 am, In Idaho AGC Education Center - Boise


23
Overton Rigging & Signaling QualificationOverton Rigging & Signaling Qualification
Time: 12:00 am - 12:00 am, In Idaho AGC Education Center - Boise


24
25
26
27
28
First Aid/CPR/AED Class - Twin FallsFirst Aid/CPR/AED Class - Twin Falls
Time: 8:00 am - 12:00 pm, In Premier Insurance - 157 River Vista Place, Twin Falls 83301

This 4 hour class meets the OSHA requirement for medical services and first aid [1926.50 (c)]. Upon completion, participants receive a course completion card to document the training. This card is valid for two years. The cost is $40 for members and $60 for non-members. This class runs from 8AM to 12PM.
29
Fall Protection Awareness - Twin FallsFall Protection Awareness - Twin Falls
Time: 8:00 am - 12:00 pm, In Premier Insurance - 157 River Vista Place, Twin Falls 83301

Falls are the leading cause of death in the Construction Industry. Lack of documented Fall Protection Training is the 5th most cited OSHA Standard. This course will cover the ABC’s of Fall Protection (Anchorages, Body Harnesses, & Connectors/Lanyards). OSHA Regulations will be reviewed along with the proper inspection and use of Fall Protection equipment. Attendees will receive hands-on instruction for donning and inspecting Personal Fall Arrest Systems (Harness & Lanyard) along with different types of Fall Protection devices (Self Retracting Lifelines, anchorages, etc.) $75.00 **This course is only available to AGC members.**
       

Comments are closed.